Practice requires patience and suitable necessary things. Talking about the drumming if you want to pursue your career as a drummer and want to earn from it, you will have to create a separate room for practicing and rehearsal. There you can learn different skills related to drumming, you can record your music and much more.
Buying a drum kit isn’t enough. Although, it always helps if you buy one from drummingpalace.com. You need to find a room in your house where you can give a proper suitable time for your drumming. Another reason for the need of separate room is that you should not disturb other members in your house.
So, if you have decided to set up a drumming room in your house but don’t know how to do it, this article is going to help you with that.
Choosing the room:
It’s the most basic and necessary step. You’ll have to keep a lot of things into mind when it comes to choosing the room. Try to find a room that is far from other rooms especially bedrooms. It should be wide and spacious but not too big. The room must have the supply to electricity and enough switches.
Locating the drum kit:
After you choose the room, the next step is to arrange it. Placing the drum kit in the appropriate position is very important. The place where you’ll put your drum kit can have a great impact on the sound. Place the drum kit in the center of the room if you want best results. The kit should be kept away from any shared wall. In this way, the sound will be pushed into the room rather than directing out to the walls.
It’s not a necessary thing but if you want the best results then go for it. Buy a vibration isolating feet and raise the floor of your drums up. This will help to create an air space between the actual floor and the isolating floor. Fill the gap with sand. Minimum vibrations will go to the actual floor and fewer people will be disturbed from your practice.
Treat windows and doors:
Windows are the weakest point of sound traveling. Try to add density and mass as much as possible to the windows so that the sound ways may not go beyond the room. You can place a heavy rigid board to block the sound from escaping. The door isn’t as weak sound traveler as windows but still, it needs treatment also. Try to add mass and density to it also.
Installing sound proof insulation:
Last but not the least; install sound proof insulation outside the walls. For better and faster results, use glue to install insulation panels rather than nailing or stapling them
There are many extra things you can like enclosing the kit and using pressure release valves etc. But these basic and easy ones would be enough for you. If you do each step properly, you can rock your drumming room.